Batching machine work through the concrete machinery transport stones, sand, stone and other raw materials, the raw materials through the belt said to the host, through the batching machine set concrete mix ratio, according to the set with the automatic matching ingredients, mixing into concrete, Generally applicable to the general construction site, roads, bridges and other projects. Dosing machine is an important equipment in the process of manufacturing concrete blocks. We should understand some of the precautions in the use of the batching machine.
1. Before starting to check the line in the loose head and loose parts, if it should be connected to the firm and solid, the box shall not put debris
2. If the dispenser does not work properly, turn off the power and turn it on again.
3. Metering bucket is often caught by some debris, so this point to pay special attention.
4. open the batching machine, the measurement should be bucket bucket bucket, or manual way out of the hopper with more than material. If the display is not '0', press the clear key to display it as '0'
5. Start the first batching process for the automatic drop correction procedures. After the results of the revised ingredients according to the revised, automatic correction of each material in two parts of ingredients to meet the measurement requirements.
