"Brick machine" As the name suggests is the production of brick machinery and equipment, the general use of stone powder, fly ash, slag, slag, gravel, sand, water as raw materials. Efficient use of fly ash, slag, stone powder, desulfurization ash, slag, coal gangue, phosphogypsum, tailings and other production of new wall materials, such as autoclaved fly ash brick, autoclaved lime bricks, aerated concrete products. In the course of the use of the brick machine for good maintenance can effectively extend the life of the brick machine, today's Shandong Hongfa staff finishing some of the brick machine maintenance precautions, hoping to be able to help our customers:
1. If the rotating gear is in operation, it should stop and check immediately
2. Be careful to check the wear of the wearable parts and pay attention to replacing the parts that are worn at any time.
3. Bearings bear the full load of the machine, so good lubrication of the bearing life has a great relationship, it directly affects the machine life and operating rate, which requires the injection of lubricants must be clean, the seal must be good
① Rotary bearing ② Roller bearing ③ All gears ④ Movable bearings, sliding plane.
4. Note that the work of the various parts of the machine is normal.
5. Place the bottom plane of the moving device, should go out of dust and other objects so that the machine can not break the material encountered when the movable bearing can not move on the chassis, resulting in serious accidents.
6. The newly installed wheels are prone to loosening and must be checked frequently.
7. Bearing oil temperature rise, should immediately stop the cause of the check to be eliminated.
